How to use a cable gun lock in a handgun

• Start Safely: Ensure the gun is pointed in a safe direction with your finger off the trigger.

  
  

• Remove Magazine: Extract the magazine and set it aside.

  
  

• Inspect the Chamber: Rack the slide back, lock it, and visually check the chamber and barrel for any rounds.

  
  

• Install Lock: Thread the gun lock through the ejection port, down into the magazine well, and lock it.

  
  

• Verify Lock: Make sure the lock is securely fastened.

  
  

• Safe Storage: Store the firearm separately from ammunition and keep the key in a secure place away from both.

How to use a cable gun lock in a semi-automatic rifle

• Safety First: Always point the rifle in a safe direction with your finger off the trigger.

  
  

• Engage Safety: Ensure the weapon's safety is on.

  
  

• Remove Magazine: Confirm the magazine is removed.

  
  

• Chamber Check: Open the chamber with the charging handle, lock it open, and visually inspect for rounds.

  
  

• Install Lock: Thread the cable lock through the ejection port and out the magazine well. Secure the lock.

  
  

• Confirm Lock: Double-check that the lock is tight and secure.

• Store Separately: Keep the rifle and ammunition stored separately; store the key in a different secure location.

How to use a cable gun lock in a shotgun

• Start Safely: Always point the shotgun in a safe direction and keep your finger away from the trigger.

  
  

• Safety Engagement: Ensure the shotgun's safety is on.

  
  

• Chamber Check: Rack the slide back and visually inspect the barrel for any rounds.

  
  

• Lock Installation: Place the shotgun on a table, unlock the gun lock, loop it through the ammunition feed and out the ejection port, then re-lock it.

  
  

• Verify Lock: Double-check that the lock is secure.

  
  

• Separate Storage: Store the shotgun and ammunition in separate secure locations; keep the key in a different secure area.